China Good quality CHINAMFG China Supplier Pgclk Type Quality Brake Disc Plate Loading Drum Type Gear Coupling

Product Description

PGCLK Drum Gear Coupling with Brake Disc(Q/LZP02.02-2005)

♦Description
Drum gear type coupling belongs to rigid flexible coupling, gear type coupling is composed of inner gear ring and flange half coupling with outer gear with same number of teeth.Can improve the contact conditions of teeth, improve the ability to transfer torque, extend the service life.Radial, axial and angular axis deviation compensation ability, has a compact structure, small turning radius, large carrying capacity, high transmission efficiency, low noise and long maintenance cycle, especially suitable for the condition of low speed and heavy loading, such as metallurgy, mining, lifting transportation and other industries, can also be applied to petroleum, chemical industry, general machinery and other kinds of shaft transmission of machine.
♦Main Dimension and Parameter(Q/LZP02.02-2005)

Type Nominal Torque
Tn/(N·m)
Allowable
Speed
(n)/(r/min)
Bore Diameter
d1d2dz
Bore Length
(L)
D0 D D1 D2 D3 L0 T C1 C2 e Grease dosage(v)
mL 
Mess
(m)
kg
Rotary inertia(l)
L/(kg·m2)
Driven Drive Y J1Z1
PGCLK1 630 4000 20 24 52 38 315 125 95 60 80 90 30 25 39 30 55 7.0 0.01
PGCLK2 1120 4000 25 28 62 44 315 144 120 75 95 105 30 25.5 44 30 100 11.2 0.03
PGCLK3 2240 3550 30 38 82 60 355 174 140 95 115 130 30 18 40 30 140 21.3 0.05
PGCLK4 3550 2500 32 38 82 60 40 196 165 115 130 130 30 29 47 30 170 29.5 0.11
PGCLK5 5000 2500 40 56 112 84 400 224 183 130 150 150 30 18 43 30 270 47.1 0.20
PGCLK6 7100 2000 48 56 112 84 450 241 200 145 170 155 30 21 50 30 380 60.1 0.31
PGCLK7 10000 1700 60 75 142 107 450 265 230 160 190 180 30 19 50 30 570 88.9 0.56
PGCLK8 14000 1700 65 75 142 107 500 285 245 175 210 180 30 20 50 30 660 105.4 0.79
PGCLK9 18000 1600 70 75 142 107 560 314 270 200 225 200 30 25 60 30 700 130.1 1.22
PGCLK10 31500 1600 80 95 172 132 800 346 300 220 250 230 30 20 58 30 900 191.2 2.17
PGCLK11 40000 1400 100 120 212 167 800 385 330 260 285 260 30 21 64 40 1200 268.2 3.88
PGCLK12 56000 1400 120 212 167 900 442 380 290 325 280 30 21 72 40 2000 369.9 6.90
PGCLK13 80000 1400 140 150 252 202 900 482 420 320 360 320 30 22 70 40 3000 522.6 11.91
PGCLK14 112000 1200 160 180 302 242 900 520 465 360 410 360 30 23 85 40 4500 756.9 20.70

Note:
1. The mass and moment of inertia of the coupling are approximate values calculated according to the minimum shaft hole diameter and maximum shaft hole length in each type;
2. The maximum braking torque Tm of the coupling shall not exceed 2 times of the nominal torque Tn, that is, Tm≤ 2Tn;
3. e is the size required for sealing;
4. The combination of coupling shaft hole is Z1/J1, Y/Y, J1/J1, Y/J1.

 

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

 

♦Our Company

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

 

♦Our Services
1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→ Packing→ Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.

♦FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.

Q 2: Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.

Q 3: How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have a very good price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1 pcs.

Q 7: Do you have inspection procedures for coupling?
A: 100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A: T/T.  
 

♦Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

disc coupling

Indicators of Wear or Damage in Disc Couplings

Disc couplings can exhibit signs of wear or damage over time due to factors like misalignment, overloading, or general usage. Detecting these issues early is crucial for preventing further damage. Some common indicators of wear or damage in disc couplings include:

  • Vibration: Excessive vibration during operation can signal misalignment, component wear, or imbalance in the disc coupling.
  • Noise: Unusual noises like clicking, clanking, or rattling can indicate wear, misalignment, or damage in the coupling components.
  • Heat Generation: Excessive heat near the coupling area can suggest friction or misalignment issues.
  • Reduced Performance: Decreased efficiency, torque transmission, or system performance may point to coupling wear or damage.
  • Visual Inspection: Look for signs of visible wear, corrosion, cracks, or deformation on the coupling components.

To detect these signs of wear or damage, regular visual inspections, vibration analysis, and performance monitoring are essential. Early detection allows for timely maintenance or replacement of the affected components, ensuring the continued reliability and safety of the disc coupling and the machinery it serves.

disc coupling

Impact of Number and Configuration of Disc Packs on Coupling Performance

The number and configuration of disc packs in a disc coupling have a significant impact on its overall performance. Here’s how:

  • Number of Disc Packs: Increasing the number of disc packs can enhance the coupling’s torque capacity and stiffness. This allows it to handle higher levels of torque while maintaining its flexibility to accommodate misalignment.
  • Configuration: Different configurations, such as single-flex, double-flex, or multiple-flex, offer varying degrees of angular misalignment compensation and torsional stiffness. Single-flex configurations provide greater misalignment capacity, while double-flex configurations offer improved torsional stiffness.

Choosing the appropriate number and configuration of disc packs depends on the specific application requirements:

  • Torque Transmission: Applications with high torque demands may benefit from a higher number of disc packs to ensure reliable torque transmission.
  • Misalignment Compensation: Applications with moderate misalignment may opt for configurations that offer higher angular misalignment compensation.
  • Torsional Stiffness: For applications where torsional stiffness is critical, a configuration with multiple-disc packs may be preferred.
  • Space Limitations: Consider the available space and coupling dimensions when choosing the number and configuration of disc packs.
  • Dynamic Behavior: Depending on the application’s dynamic behavior and vibration characteristics, the appropriate configuration can be selected to minimize resonances.

Ultimately, the selection of the number and configuration of disc packs in a disc coupling should be based on a thorough understanding of the application’s torque, misalignment, and stiffness requirements to optimize coupling performance and reliability.

disc coupling

Disc Couplings: Function and Application in Mechanical Systems

A disc coupling is a type of flexible coupling used in mechanical systems to connect two shafts while allowing for angular misalignment, axial movement, and some degree of torsional flexibility. It consists of two hubs with flexible metallic discs, known as diaphragms, positioned between them.

Disc couplings are commonly utilized in various industrial applications where precise power transmission, reliability, and flexibility are essential. Some key features and applications of disc couplings include:

  • High Torque Transmission: Disc couplings are designed to transmit high torque loads between shafts while maintaining shaft alignment. The flexible diaphragms can accommodate misalignments and prevent torque overloads on connected equipment.
  • Angular Misalignment Compensation: The design of disc couplings allows them to handle angular misalignment between shafts, which can occur due to manufacturing tolerances or dynamic conditions.
  • Axial Movement Absorption: Disc couplings can absorb limited axial movement along the shaft axis without transferring excessive forces to the connected components.
  • Torsional Flexibility: The metallic diaphragms of disc couplings offer torsional flexibility, enabling them to dampen vibrations and shock loads. This helps protect connected equipment from damage and increases overall system reliability.
  • Precision Machinery: Disc couplings are often employed in precision machinery and equipment, such as CNC machines, robotics, pumps, compressors, and servo systems. These applications require accurate motion control and reliable power transmission.
  • High-Speed Applications: Due to their balanced design and ability to maintain precise alignment, disc couplings are suitable for high-speed applications where even a small misalignment can lead to vibration and wear.

The ability of disc couplings to provide both flexibility and precise torque transmission makes them a preferred choice in various industries, including manufacturing, aerospace, automotive, and more. Proper selection, installation, and maintenance of disc couplings contribute to improved machinery performance, reduced downtime, and extended component life.

China Good quality CHINAMFG China Supplier Pgclk Type Quality Brake Disc Plate Loading Drum Type Gear Coupling  China Good quality CHINAMFG China Supplier Pgclk Type Quality Brake Disc Plate Loading Drum Type Gear Coupling
editor by CX 2024-02-21

flexible disc coupling

As one of leading flexible disc coupling manufacturers, suppliers and exporters of products, We offer flexible disc coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of flexible disc coupling

Recent Posts